I need you to write 2-3 pages regarding the global issues of butanol production from ABE fermentation, the ABE (Acetone, Butanol, and Ethanol) fermentation process using Clostridia bacteria used to be common. here are some sources that can help you and you can find other source if these sources did not help. https://www.e-education.psu.edu/egee439/node/648https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4980751/https://www.sciencedirect.com/science/article/pii/S2215017X15000430https://etd.ohiolink.edu/rws_etd/document/get/ysu1242762960/inlinehttp://cdn.intechopen.com/pdfs/43682/InTech-The_promising_fuel_biobutanol.pdfhttps://pubs.acs.org/doi/full/10.1021/acs.energyfuels.6b00819?src=recsys

this for reportPhD________1: ObjectiveThis lab experiment is an opportunity for you to discover how the material you are learning in class can be applied in a real-world, practical application. In your own words, write an explanation of the theory behind the experiment as they relate to the current chapter and course objectives.2: ProcedureIn your own words, write an explanation of the procedure behind the experiment.Include as much visual aid as possible such as wiring diagram, screenshots and pictures. The procedure must be detailed enough so that someone else can reproduce the lab.3. Data &ResultsShow how results were verified.If any data was collected, list here.Add any visual information that can enhance the quality of your report.4. DiscussionYou and your partners have had the opportunity to work through, by trial and error, each step of the lab experiment. Include an explanation of the errors made and what was done to fix them. Discuss the results of your lab and show how the objectives were met.5. ConclusionSummarize the results or your lab and show how the objectives were met.State at least 4 specific outcomes that you were able to achieve during the experiment.• You will need to print out 1 copy of this cover sheet off of Blackboard for every lab report.• You will need to print out a checkout sheet off of Blackboard prior to the lab and have it signed by the TA or Instructor.• Screen shots of graphic displays may be included as well as pictures and samples of programs if applicable.• Every student is required to fill out their lab report and hand in a hardcopy by the due date. You can and should work on the experiment with your partners to make sure all your data are matching each other’s but you will still be graded on your own lab report and the personal write-up that YOU give.• Proper nouns must be avoided throughout the report.

Consider a steam power plant operating on the ideal regenerative Rankine cycle with one open feedwater heater . Steam enters the turbine at 20 MPa and 500°C and is condensed in the condenser at a pressure of 10 kPa. Some steam is extracted from the turbine, at the extraction pressure, and enters the open feedwater heater. Using the EES program : Investigate the effect of extraction pressure on the thermal efficiency of the cycle using a pressure range of 2 MPa. . Investigate the effect of extraction pressure on the second-law efficiency of the cycle. Heat is supplied to the steam in a furnace maintained at 800 K, and waste heat is rejected to the surroundings at 300 K.Determine the exergy destruction in the boiler, turbine and feed water heaters? Comment on the results.Repeat the same analysis (1 to 3) if the OFWH is replaced by a closed feed water heater . Note: All thermo-physical properties should be calculated as functions of the state pressure and temperature using the EES library.Assumptions, if any, should be mentioned clearly and justified in your report.Create parametric tables and plot efficiency versus extraction pressure.The report (word format) should include: schematic diagrams , T-s diagrams, thermodynamics analysis of the cycles, results and discussions, and conclusions.